RS-70
Information
Unglazed Victorian Floor Tiles: 50x50m thickness 9mm
Design: 50mm white square, 35x35mm grey square, 35x35x50mm cognac triangle, 50x50x70mm white triangle, 50x50x70mm brown triangle, 50x50x70mm blue triangle, 50x50x70mm mole triangle, encaustic tiles
Border : 50mm grey & white & blue square, encaustic tiles, 50x50x70mm grey triangle, 50x50x70mm white triangle, 25x150mm brown strip, 0uter border 150x150mm brown square
Colours: white, blue, grey, brown, mole, cognac
Field per square metre
£439.00– loose tiles
£552.00– assembled sheets including drawing
Border per linear metre
£56.00 – loose tiles
£66.00 – assembled sheets
Price Excludes VAT
Free Quotation
We provide free quotations based on your floor measurements and chosen tile design.
Please note your chosen tile design code (for example VP-1, RS-10, BP-8, etc.) and send it to us with your measurements.
3 Easy Steps to Buy Your Tiles
-
-
It is recommended to increase the surface calculated on site by 10% in anticipation of any occasional wastage due to cutting.
-
Our unglazed tiles are non-rectified, dry pressed and have a low water absorption rate.
Our tile sizes can therefore vary according to tolerances determined by recognized standards (French Cahiers du CSTB and NF EN 14411 standard in force).
Consequently, it is essential to use a 2 to 3mm grout width for all tiles supplied loose, and potential adjustments to grout width may be necessary due to this constraint.
-
Because our tiles are made from natural raw materials, some slight shade variations may occur from one batch to another for tiles of the same color.
Therefore, the availability of identical shades in cases of replenishment or additions to previous projects cannot be guaranteed.
