High quality installation service

Our company provides a comprehensive tile installation service. This is an additional service for clients who have purchased tile designs and tiles from us. Whether it’s a bathroom, kitchen, hallway, outdoor patio or path to your front door, our certified tiler will work to get the job done to a high specification.

Attention to detail

Our service means high quality and attention to detail.

1 bad corner

Bad corner

The corner inside the border isn't seamless

1 our corner

Seamless corner

The corner is seamless

2 bad arch

Imperfect arch

2 our arch

Ideal arch

Example project 1: exterior

Victorian pathway tiles 50x50mm thickness 5mm, assembled sheets with border.

1.

We lay new, fresh concrete as a foundation for new tiles. We create a base of at least 70mm to prevent any problems or cracks in the future. We make sure the surface is completely level, which is very important for Victorian tiles. We never lay new tiles on top of old existing tiles as such practice, albeit common, is not professional.

2.

We lay out sheeted tiles symmetrically, each side with equal distance to ensure the best result. Next we lay the border around the checkerboard making sure all corners are ideal. This requires meticulous work and plenty of experience.

3.

This is the final result. Ideal tiled floor with identical corners on both upper and lower part.

Example project 2: interior

Victorian hallway tiles 50x50mm thickness 5mm, assembled sheets with border.

1.

First, the plywood has to be firmly screwed to the floor so it’s completely flat and doesn’t move. Since wood is more subject to movement than concrete it’s very important to use a durabase ditra matt, which is specifically designed to absorb movement and prevent tiles from cracking in the future.

2.

Next step is to prepare the whole surface for mosaic tiles. First, we need to measure the floor and then lay the tiles symmetrically so the space on both sides is the same. It’s important to lay the inner design first and the border later.

3.

When the tiles have been evenly laid we can start installing the border. The border tiles always have to be cut on site as the length of each side of the floor might be very different. When that’s done we proceed to grout and seal the tiles.

Examples of our work

All tiling projects below have been installed by Martin Mosaic.

Videos

All tiling projects below have been installed by Martin Mosaic. To see more please visit our video gallery.

We will:

  • Deliver the tiles at a time that is convenient to you.
  • Cover vents to contain dust and debris during installation.
  • Remove your old flooring and prepare the surface for installation.
  • Lay out the tiles as per your chosen design for your inspection. Once you are happy with the design, glue and grouting is applied.
  • Clean the installation area and remove project waste.
  • Walk through the final inspection with you.
  • Provide maintenance and warranty information.

Please contact us if you are interested in booking this service.